Job Actions

Job Information

Tech I - Flow Station 2 Drill Site Maintenance Level 2 - Prudhoe
Category: Construction
  • Your pay will be discussed at your interview
  • You will need mechanical piping, structural and scaffold disciplines, rigging, bolt up, pipefitting years experience
  • Essential Job Functions:
    Knowledge, Skills, and Abilities:
    + Advanced knowledge of all of the following: mechanical piping, structural and scaffold disciplines including bolt up, rigging, pipefitting/installation
    Physical Demand/Work Environment:
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential functions of this job, the employee is required to:
    + Carry: Carry 50 lbs with two hands for a distance of 50 ft x 2 for a total of 100 ft (Allow a 60 second rest break between carry tests.). ,
    + Stair Climb: Climb up and down 15 steps x 20 for a total of 300 steps; Self-paced (Allow a 60 second break after walking up and down each 60 steps),
    + Stair Climb and Carry: While carrying 40 lbs in one hand and holding onto a railing with the other hand for safety, climb up and down 15 steps x 5 for a total of 75 steps. Self-paced, but continuous. (Allow a 60 second rest break after walking up and down each set of 15 steps)
    + Slanted Ladder: Climb up and down 10 rungs x 3 for a total of 30 rungs. (Self-paced, continuous)
    + Repetitive Kneel Test: Perform from standing, kneel on one knee, alternate from left to right knee, x 10 each knee,
    + Repetitive Stoop Test: Perform from standing position, bend forward at waist as far as possible without bending the knees with hands reaching toward the floor x 5, self-paced, but continuous,
    + Repetitive Squat Test: Perform a functional squat and stand x 5,
    + Twist and Flex Test: Perform from standing alternate toe touches x 10 to each side to assess ability to twist and flex the trunk repetitively.
    The minimum qualifications for this position are:
    + One or more of the following Equipment Certifications required: telehandler (zoom boom), forklift, loader, manlift within 90 days of hire required

Job code: lhw-e0-88393840

Company Profile


Contact Company

Local Information

Laugh while you Look

Sponsored Ads


  Job posted:   Tue Apr 17, 2018
  Distance to work:   ? miles
  1 Views, 0 Applications  
Tech I - Flow Station 2 Drill Site Maintenance Level 2 - Prudhoe
Assist drill site operators with daily operations and maintenance of oil wells, manifold buildings, related equipment and facilities pertaining to oil production. Perform maintenance work on oil field related equipment and facilities and operates drill sites when trained and competent.
+ Accountable for safe work practices and hazard recognition for your task.
+ Must be a self-starter; able to work independently with minimal supervision
+ Demonstrate adherence to established safety policies and procedures
+ Perform rigging, bolt-up craft work including all phases of advanced maintenance work related to Drill-sites and oil wells
+ Adhere to material requirements and specifications; have the knowledge to identify materials related to piping, structural and architectural designs
+ Must perform material take-offs needed for the performance of mechanical maintenance task.
+ Must have knowledge to examine work and materials for compliance with job and safety specifications
+ Perform safety and productivity observations including shop, field, and vehicle inspections; ensuring that all incidents are promptly reported
+ Attend various components of technical, developmental and safety training
+ Promote safe work practices and implement company and client safety policies, including proper hazard recognition and mitigation
+ Demonstrate support for the company's and client environmental management system
+ Continually seek and implement work process improvements
+ Have working knowledge and understanding of insulation materials, piping supports, pipeline and facility piping
+ Have a working knowledge of installation of piping spools and miscellaneous mechanical components to include carbon and Stainless steel components
+ Have the knowledge and skill to identify material needs related to piping, structural and architectural designs
+ Must be a competent rigger and knowledge of hydro testing procedure
+ Be competent with mechanical skills, including ability to use proper tools and equipment applicable to petrochemical operation.
+ Have a working knowledge to replace ball, gate, plug and globe valves as required
+ Must have a general knowledge of blue prints, P&ID's and capable of interputation.
+ Have knowledge in fabrication, assembly, handling, installation, dismantling, adjustment, alteration and repair of all oilfield process facilities and equipment
+ Knowledge of technical and safety policies, procedures and standards.
+ Ability to work as part of a team with client, fellow workers and alternate.
+ Ability to effectively communicate with fellow workers, alternate and client effectively.
+ Advanced ability to interpret mechanical drawings & P&ID
+ Basic hand/power tool knowledge
+ Ability to interpret work instructions
+ OSHA Competent Scaffold Builder
+ Must be able to work in confined spaces
+ Basic knowledge of piping insulation
+ Ability to operate vehicles (i.e. box van, flatbed)
+ Advanced knowledge of drill site maintenance
+ Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, reach through low and high ranges and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear
+ Lift 50 lbs from floor to waist x 2 with a 12 second interval,
+ Lift 20 lbs from floor to shoulder x 2 with a 12 second interval,
+ Lift 20 lbs to from floor to crown level x 2 with a 12 second interval,
+ High school diploma or equivalent (GED)
+ DOT Medical Card within 6 months of hire
+ Hazardous endorsement within six (6) months of hire
+ Ability to be insured by CH2M's auto insurer
+ Completion of Scaffold Inspection Competent Person training within 90 days of hire
+ RAT Certification
+ North Slope experience
+ PSM certification for drill site operations
Candidates must successfully complete all required pre-employment requirements including physical, drug screen and background check

job description is intended to describe the nature and level of work being performed by people assigned to this position. It is not to be construed as an exhaustive list of all responsibilities and duties required of the job incumbents

This position is located on the North Slope and requires a rotational work schedule.

While performing the duties of this job, the employee may be exposed to extreme weather conditions. An individual will be required to work the majority of hours in an industrial environment and will need to be able to quickly respond to a change in work demands. Must be able to routinely lift up to 40 lb. [Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions].

Any offer of employment will be contingent upon:

+ Demonstrated ability to perform the physical requirements (listed above) of this position via the successful completion of a Fitness for Duty Evaluation

+ Negative results in a drug test

+ Attainment of a North Slope Training Certification (NSTC) via completion of modules

CH2M will schedule and cover program costs for Fitness for Duty Evaluations, drug tests, and NSTC training for job candidates. Candidates will not be compensated for their personal time spent completing these programs or for costs of previously attending the NSTC training, drug test or FFD evaluation.

At CH2M, the greatest challenges provide the biggest rewards. Each day, your drive and creative ideas will be providing solutions that help build a better tomorrow. Whether it is the pride that comes with accomplishment, personal growth or making a difference in the world, you will discover true success in a career that brings out the best in you at CH2M. Ready? Let's get to work. Developing People through Challenging Projects CH2M is an Equal Opportunity Employer.

CH2M will not sponsor a work visa (e.g. H1B, etc.,) to fill this position.


CH2M is an Equal Opportunity Employer - M/F/Veteran/Disability. Learn more about your rights under Federal EEO laws and supplemental language.

More Information »